胶水的粘度关于电教质量的影响是十分大的，粘度过大，可能导致拉丝现象;多小的话，可能导致身染焊盘，所以挑选适宜的浓度关于硅胶点胶机的工作是十分重要的。在硅胶点胶机的运用过程中会遇到各种各样的问题，可是只需你提早做好预备，了解硅胶点胶机的性能和参数，就必定能够处理的。

　　The viscosity of glue has great influence on the quality of audio-visual education. Excessive viscosity can lead to the phenomenon of wire drawing. If it is small, it may lead to body dyed pad. Therefore, it is very important to select suitable concentration for silicone rubber dispenser. During the application of silicone dispensers, various problems will be encountered, but only if you prepare early, understand the performance and parameters of silicone dispensers, you will be able to deal with them.

　　温度影响点胶机胶水的粘稠度和速度，在硅胶点胶机的工作中是一个非常重要的参数，点胶胶水在不必的时分一般存储在冰箱中，运用之前半小时左右拿出来。胶水在运用的时分温度应该控制在24摄氏度左右;别的，环境的温度也对胶水有很大的影响，据测验表明，环境温度差5摄氏度的话，就会形成一半的点胶量改变，硅胶点胶机所以环境温度的控制也是十分重要的。

　　The temperature affects the viscosity and speed of dispenser glue. It is a very important parameter in the work of silicone dispenser. Dispensing glue is usually stored in the fridge at no time, and it is taken out about half an hour before using. The glue should be controlled at 24 degrees Celsius in the temperature when the temperature of the environment; the other, also has a great effect on the glue, according to the test showed that the environmental temperature of 5 degrees Celsius, it will form a dispensing half the amount of change, so the environmental temperature control silicone dispensing machine is very important.

　　当胶流速变慢或者混胶不均时清洗混合器。将混合器拆下横放在台钳上，夹住两端盖，不要夹到螺丝。用六角扳手松开两端的六条螺丝，打开器体，取出垫片，挡针，混合芯。将各个零件清洗干净。端盖不要弄变形，各个平面不要有划伤。

　　The mixer is cleaned when the flow rate is slow or the glue is uneven. The mixer remove across the vise, clamped at both ends of cover, not to screw clamp. Release the six screws at both ends with a six angle wrench, open the body, remove the gasket, the needle, and the mixed core. Clean the parts. Do not deform the cover, and do not have any scratches in each plane.

　　枪口混合器清洗时直接拧下枪口混合器取出混合芯即可。清洗枪柄混合器时，先把枪上的定位螺丝松开，然后拧下枪柄混合器。枪口混合器同混合器同周期清洗;抢柄混合器同枪同周期清洗，半年或一年洗一次。

　　When the muzzle mixer is cleaned, the muzzle mixer is directly unscrewed out and the mixed core is removed. When the first mixer cleaning grips, positioning screws loose on the gun, then unscrew the grips mixer. The muzzle mixer is cleaned in the same cycle with the mixer; the shank mixer is cleaned with the gun in the same cycle, and is washed once in half a year or a year.

　　公司全方位服务于客户，以质量上乘、价格合理和的售后服务与客户携手奋进，共同发展。质量保证，欢迎咨询洽谈。

　　The company serves the customer in all directions, with the high quality, the reasonable price and the perfect after sale service and the customers to advance hand in hand, and develop together. Quality assurance, welcome to consult the negotiation.